Elektral ThruScan Manual de usuario descargar pdf (Pagina 49)

You should mount your WTMD as in the necessary distance, away from moving metal objects. This

distance should at least be 1 meter depending on the type of the moving metal.

Also the environmental conditions should match with the security class of your WTMD. See section

2.1

*Is it possible to have the mains input from Top to Bottom or Bottom to Top

The standard position of the mains input for ThruScan WTMDs is at the back cover of the control

unit. If the desired location for the mains input on the WTMD is clarified prior to the order, the

mains input may be arranged to be on the desired point if allowed.

* How can I operate multi WTMDs together?

To operate your WTMDs in parallel, you should follow the instructions in Section 6.13 If there is no

specific provided cable then a twin cable should be connected from outputs 1 and 2 via the proper

connectors between the sockets of the ThruScan s as shown in

Section 3.7.

Do not forget to turn OFF the switch on the main card of the slave

WTMD. See Section 6.13

* I want to control my WTMD inside the building with the SRC-Remote Control SCADA

Software. How should I arrange the connection?

A special connection cable is provided by the producer along with the Remote Control SCADA

Software. Plug in the appropriate end of this cable to the socket explained in Section 3.7 and the

other end to the Communication Port of your computer (COM).

You may also use BUS Network or the Star Network as the Communication Technology.

An example is explained in the picture below. You may learn the details about the programming

from Section 10.2. Also See Sections 3.7, 6.13, 10.2

It is also possible to utilize separate cables for each ThruScan

STAR NETWORK

(S3/s9; 16 pcs–sX; 99 pcs)

BUS NETWORK

(S3/s9; 16 pcs–sX; 99 pcs)

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 55 56 57

Sin comentarios

Elektral ThruScan Manual de usuario Pagina 49